| |
CX2SA > SATDIG 16.08.08 00:38l 417 Lines 14667 Bytes #999 (0) @ WW
BID : 26068_CX2SA
Read: GUEST
Subj: AMSAT-BB-digest V3 416
Path: IZ3LSV<IK2XDE<F5GOV<F4BWT<DK0WUE<7M3TJZ<HS1LMV<CX2SA
Sent: 080815/2238Z @:CX2SA.LAV.URY.SA #:26068 [Minas] FBB7.00e $:26068_CX2SA
From: CX2SA@CX2SA.LAV.URY.SA
To : SATDIG@WW
Today's Topics:
1. Re: Sunny Side Up (Simon (HB9DRV))
2. SSB Preamp (Peter)
3. Re: FW: [PNWVHFS] Need A Big Dish? (David - KG4ZLB/M?ZLB)
4. Re: FW: [PNWVHFS] Need A Big Dish? (Alan P. Biddle)
5. Re: DIY: Parabolic mirror (James Whitfield)
6. Rotor Controllers (Howard Kowall)
7. FO-29 (Peter)
----------------------------------------------------------------------
Message: 1
Date: Fri, 15 Aug 2008 14:40:31 +0200
From: "Simon \(HB9DRV\)" <simon(AT)hb9drv.ch>
Subject: [amsat-bb] Re: Sunny Side Up
To: "AMSAT.org" <amsat-bb(AT)amsat.org>
Message-ID: <90A40A1AA2704EC5B690BEB827316094(AT)doubletrouble>
Content-Type: text/plain; format=flowed; charset="iso-8859-1";
reply-type=response
Thanks everyone for this feedback - drat, I'll have to add this option.
As it happens it quite easy to determine whether a satellite is illuminated
or not.
Simon Brown, HB9DRV
----- Original Message -----
From: "Nigel Gunn G8IFF/W8IFF" <nigel(AT)ngunn.net>
> It helps those "astronomers" that like to visually spot satellites.
> Spotting the ISS and shuttle is quite popular.
------------------------------
Message: 2
Date: Fri, 15 Aug 2008 09:54:30 -0400
From: Peter <roi(AT)optonline.net>
Subject: [amsat-bb] SSB Preamp
To: AMSAT-BB(AT)amsat.org
Message-ID: <001101c8fede$981d21e0$6701a8c0(AT)peter>
Content-Type: text/plain; charset=Windows-1252
HI,
"The fault lies in thyself", was uttered many moons ago but that quote now
applies to me! In summary I could not get my SSB 70cm preamp to work with
my Icom 910; Jerry of SSB gave me terrific support to try get it working,
and found it hard to believe that the relays engaged and it did not
function. He said in 15 years not one was DOA, and said the only conclusion
was that it was connected to the wrong antenna. I did the system checks
that were suggested by this BB and still no joy. Convinced that the unit
had a problem I sent the SSB Preamp back to Larry, no surprise it checked
out fine; guess what the coax was put to the wrong antenna upon
installation. I'm the "village idiot"! I want to thank all those that
responded, this BB is a terrific asset to anyone interested in getting help
with Satellite activity, thank you and my sincere apologies for taking up
the bandwidth an so much of Jerry's valuable time.
73,
Pete, WB2OQQ
------------------------------
Message: 3
Date: Fri, 15 Aug 2008 11:04:45 -0400
From: David - KG4ZLB/M?ZLB <m0zlb(AT)btinternet.com>
Subject: [amsat-bb] Re: FW: [PNWVHFS] Need A Big Dish?
To: w7lrd(AT)comcast.net
Cc: AMSAT-BB <AMSAT-BB(AT)amsat.org>
Message-ID: <48A59B0D.8000507(AT)btinternet.com>
Content-Type: text/plain; charset=ISO-8859-1; format=flowed
Cemetary Road eh?
At least its in the "dead center" of town!
Tee hee!
David
KG4ZLB
w7lrd(AT)comcast.net wrote:
> I am just fowarding this to the AMSAT-bb, "just in case". If interested
respond to the fellow who started this.
> 73 bob W7LRD
>
> --
> "if this were easy, everyone would be doing it"
>
> -------------- Forwarded Message: --------------
> From: hwardsil <hwardsil(AT)gmail.com>
> To: PNWVHFS <PNWVHFS(AT)googlegroups.com>
> Subject: [PNWVHFS] Need A Big Dish?
> Date: Fri, 15 Aug 2008 02:58:11 +0000
>
>
> >From the Vashon Island club reflector:
>
> New real estate listing on Cemetery Road might be of interest to
> moonbounce types... Two VERY large satellite dishes on 10 acres.
> They are the round white patches in the middle of the red outlined
> area in the satellite photo at this URL:
>
http://www.loopnet.com/xNet/Looplink/Profile/Profile.aspx?stid=cbre7&LID=15764
90
> 9&LL=true&UOMListing=&UOMMoneyCurrency=
>
> This was the Alascom facility that linked the US to KL7. Lots of
> goodies in there and a pair of 10-meter dishes. Make your own
> propagation or cook the Thanksgiving turkey without firing up that
> messy deep-fryer!
>
> 73, Ward N0AX
>
>
> --~--~---------~--~----~------------~-------~--~----~
> ~The Voice of the Pacific NorthWest VHF Society~
> You received this message because you are subscribed to the Google Groups
> "PNWVHFS" group.
> To post to this group, send email to PNWVHFS(AT)googlegroups.com
> To unsubscribe from this group, send email to
> PNWVHFS-unsubscribe(AT)googlegroups.com
> For more options, visit this group at http://groups.google.com/group/PNWVHFS
> -~----------~----~----~----~------~----~------~--~---
> _______________________________________________
> Sent via AMSAT-BB(AT)amsat.org. Opinions expressed are those of the author.
> Not an AMSAT-NA member? Join now to support the amateur satellite program!
> Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb
>
>
--
*David*
*KG4ZLB/M?ZLB*
*www.kg4zlb.com <http://www.kg4zlb.com/>*
*www.m?zlb.com <http://www.m0zlb.com/>*
------------------------------
Message: 4
Date: Fri, 15 Aug 2008 10:14:09 -0500
From: "Alan P. Biddle" <APBIDDLE(AT)UNITED.NET>
Subject: [amsat-bb] Re: FW: [PNWVHFS] Need A Big Dish?
To: " 'David - KG4ZLB/M?ZLB' " <m0zlb(AT)btinternet.com>
Cc: 'AMSAT-BB' <AMSAT-BB(AT)amsat.org>
Message-ID: <47233CB224C54C56B3E24F5ABB8F6E63(AT)WA4SCA>
Content-Type: text/plain; charset="iso-8859-1"
That may be why people are dying to move in. ;)
Alan
WA4SCA
Cemetary Road eh?
At least its in the "dead center" of town!
Tee hee!
David
KG4ZLB
w7lrd(AT)comcast.net wrote:
> I am just fowarding this to the AMSAT-bb, "just in case". If interested
respond to the fellow who started this.
> 73 bob W7LRD
>
> --
> "if this were easy, everyone would be doing it"
>
> -------------- Forwarded Message: --------------
> From: hwardsil <hwardsil(AT)gmail.com>
> To: PNWVHFS <PNWVHFS(AT)googlegroups.com>
> Subject: [PNWVHFS] Need A Big Dish?
> Date: Fri, 15 Aug 2008 02:58:11 +0000
>
>
> >From the Vashon Island club reflector:
>
> New real estate listing on Cemetery Road might be of interest to
> moonbounce types... Two VERY large satellite dishes on 10 acres.
> They are the round white patches in the middle of the red outlined
> area in the satellite photo at this URL:
>
http://www.loopnet.com/xNet/Looplink/Profile/Profile.aspx?stid=cbre7&LID=157
6490
> 9&LL=true&UOMListing=&UOMMoneyCurrency=
>
> This was the Alascom facility that linked the US to KL7. Lots of
> goodies in there and a pair of 10-meter dishes. Make your own
> propagation or cook the Thanksgiving turkey without firing up that
> messy deep-fryer!
>
> 73, Ward N0AX
>
>
> --~--~---------~--~----~------------~-------~--~----~
> ~The Voice of the Pacific NorthWest VHF Society~
> You received this message because you are subscribed to the Google Groups
> "PNWVHFS" group.
> To post to this group, send email to PNWVHFS(AT)googlegroups.com
> To unsubscribe from this group, send email to
> PNWVHFS-unsubscribe(AT)googlegroups.com
> For more options, visit this group at
http://groups.google.com/group/PNWVHFS
> -~----------~----~----~----~------~----~------~--~---
> _______________________________________________
> Sent via AMSAT-BB(AT)amsat.org. Opinions expressed are those of the author.
> Not an AMSAT-NA member? Join now to support the amateur satellite program!
> Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb
>
>
--
*David*
*KG4ZLB/M?ZLB*
*www.kg4zlb.com <http://www.kg4zlb.com/>*
*www.m?zlb.com <http://www.m0zlb.com/>*
_______________________________________________
Sent via AMSAT-BB(AT)amsat.org. Opinions expressed are those of the author.
Not an AMSAT-NA member? Join now to support the amateur satellite program!
Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb
------------------------------
Message: 5
Date: Fri, 15 Aug 2008 10:28:56 -0500
From: "James Whitfield" <n5gui(AT)cox.net>
Subject: [amsat-bb] Re: DIY: Parabolic mirror
To: <amsat-bb(AT)amsat.org>
Message-ID: <000a01c8feeb$a217fd70$6401a8c0(AT)Sony2G4>
Content-Type: text/plain; charset="iso-8859-1"
Finally. I was wondering if this thread would pass from the grousing and
"It'll never work" stage into something more like "How can I take this idea
and adapt it to something I want."
The end product of the two videos was a curved mirror, presumeably intended
to be a part of a solar energy collector. The material used was a
reflective film, which needed to be mounted on a properly shaped and
smoothed surface, which was made of fiberglass/resin. Its shape was
determined by form, in this case made of concrete, which was cast in the
concave end of a used water tank.
Can this be applied to another project......Maybe with a little thought and
a lot of adaptation:
A few months ago, I had the idea to demonstrate PSK31 communications at a
Boy Scout event, only I wasn't going to use radios. My idea was to use a
speaker/microphone mounted at the focus of a paraboloid reflector to send
the sound a few hundred yards to another similar setup. I didn't have the
time to construct the project for the Scout event, largely because I would
need to build a parabolic surface 30 to 60 inches in diameter. But I
haven't dismissed the idea entirely.
Some of you might be interested in a parabolic radio wave reflector. Buying
one may be outside your budget, so you might consider trying to build one.
The videos suggest a way to build a curved surface, that is common to the
sound and radio projects suggested above. Parabololic would be the
mathematically ideal shape. In practice, as was discussed in previous
posting, the surface needs a smoothness better than a quarter wavelength at
the frequency in use. The shape is often spheroid, the distinction and the
actual choice of shape should be another discussion. The point being, it is
possible to define the desired shape and the allowable errors.
Would a fiberglass shell built up on a concrete form meet the shape and
error requirements? Perhaps. For my sound project, the wavelengths under
consideration start at about 4 inches and get longer. ( 3,000 Hz at 1,000
feet per second, and down to about 250 Hz, typical of PSK31 output from a
sound card. I would get better results using 6KHz or higher frequency sound
waves. ) I can be pretty confident that the shape and smoothness
requirement could be met with the DIY manufacturing technique. Would it
work for a radio reflector -- choose a frequency, calculate the shape and
smoothness, then make your own judgement call. If you wanted to use it for
an optical telescope, not a good idea. It was after all, originally
designed for a solar cooker, shaped and smoothed to put the sun's rays on a
cooking pot, not star images on film.
What about the reflector material? For a sound reflector, I don't need
shinny plastic to be added, the fiberglass would be reflective of sound by
itself. Painting might help smooth the surface, particularly if I had to
fill bubbles or sand down other flaws. For radio waves, I seriously doubt
the plastic film would be adequate. You might be able to use aluminum foil
or tape.
Thinking differently, you might consider metal screen as the first layer of
material in the construction of the paraboloid shape. Then add resin and
layers of fiberglass to strengthen and set the shape. ( No. I have never
tried it. I have no idea if it is worth trying. ) It may be possible to
put a conductive coating on the shape, then electro-plate copper onto the
surface in a thickness that will reflect radio waves. Maybe someone else
has better ideas on how to make a radio reflective surface to be added to
the curved surface.
Substitute some materials. I briefly considered paper machet or a wood and
stryofoam form instead of the concrete suggested in the video. The concrete
form is probably more durable and stable, but it requires that you have a
mold that you can pour it into. That means another chance for "copy
errors". Might be well worth the trouble if you intend to make several.
I also considered paper machet instead of fiberglass for the shell material.
It would have been something that the Scouts could build. The problem is
that it shrinks as it dries, so the shape would not be very precise. After
doing some research on construction, I found out that they used to make
boats and canoes out of paper and glue ( waterproofed with paint and
varnish ). The end product was probably not as light or as durable as the
wooden boats produced at the same time, but certainly less expensive. They
had their niche. From that, I seriously considered paper/glue composite my
primary choice for construction - again, mostly so that it could be
constructed by Scouts with available, low hazard, materials.
Does any of this have any relevance building a parabolic reflector that can
be used in satellite communications? If it gives you ideas, or challenges
you to find a better way.....More likely you will just shake you head
murmuring about that crazy old geezer and his crack pot ideas. I tip my hat
to those of you who are my elder, and wish health and long life to all.
James
n5gui
------------------------------
Message: 6
Date: Fri, 15 Aug 2008 13:27:04 -0500
From: "Howard Kowall" <hkowall(AT)shaw.ca>
Subject: [amsat-bb] Rotor Controllers
To: <amsat-bb(AT)amsat.org>
Message-ID: <000b01c8ff04$84f91e90$6801a8c0(AT)howardoffice>
Content-Type: text/plain; charset="iso-8859-1"
Hello to all
Has Anyone used any of Fox Delta Satellite Rotor Controllers
I am thinking of purchasing the ST3 (Has the LCD Dispaly for Target and Acual
az,el)
I presenlty use a FodTrack that i made,but has some compatability issues with
some software
so I thought I would go to a controller that uses serial com rather then the
parellel port and emulates the Yaesu GS232.
It is a fraction of the price of the GS232.
Thanx Very Much
Howard
VE4ISP
------------------------------
Message: 7
Date: Fri, 15 Aug 2008 14:52:27 -0400
From: Peter <roi(AT)optonline.net>
Subject: [amsat-bb] FO-29
To: amsat-bb(AT)amsat.org
Message-ID: <008801c8ff08$6603b780$6701a8c0(AT)peter>
Content-Type: text/plain; charset=Windows-1252
Hi,
I was following a 15:46 pass today in NY of FO-29, all my past
experience's have been with the FM birds. I am using SatPC32 and LVB
tracker, the program went into "Flip" mode at AOS, setting the elevation at
180 degrees. FO-29 passed overhead and I did not hear it, did I miss
something in the setup? Thank you.
73,
Pete, WB2OQQ
------------------------------
_______________________________________________
Sent via amsat-bb(AT)amsat.org. Opinions expressed are those of the author.
Not an AMSAT member? Join now to support the amateur satellite program!
http://amsat.org/mailman/listinfo/amsat-bb
End of AMSAT-BB Digest, Vol 3, Issue 416
****************************************
Read previous mail | Read next mail
| |
