| |
CX2SA > SATDIG 04.10.08 21:34l 266 Lines 7616 Bytes #999 (0) @ WW
BID : 38327_CX2SA
Read: GUEST
Subj: AMSAT-BB-digest V3 502
Path: IZ3LSV<IK2XDE<DB0RES<ON0AR<HS1LMV<CX2SA
Sent: 081004/1931Z @:CX2SA.LAV.URY.SA #:38327 [Minas] FBB7.00e $:38327_CX2SA
From: CX2SA@CX2SA.LAV.URY.SA
To : SATDIG@WW
Today's Topics:
1. Re: ISS SSTV Hardware (Fabiano Moser - PY5RX)
2. Re: ISS SSTV Hardware (Simon (HB9DRV))
3. Re: ISS SSTV Hardware (Simon (HB9DRV))
4. SSB SP-7000 rejection (Tim Tapio)
5. AO-51 L/U APRS (Mineo Wakita)
6. Re: ISS SSTV Hardware (Wouter Weggelaar)
7. Re: ISS SSTV Hardware (Simon (HB9DRV))
----------------------------------------------------------------------
Message: 1
Date: Sat, 4 Oct 2008 10:14:38 +0100
From: "Fabiano Moser - PY5RX" <fabianomoser(AT)gmail.com>
Subject: [amsat-bb] Re: ISS SSTV Hardware
To: "Simon \(HB9DRV\)" <simon(AT)hb9drv.ch>
Cc: amsat-bb(AT)amsat.org
Message-ID: <000a01c92601$a1aecca0$0301a8c0(AT)hp>
Content-Type: text/plain; format=flowed; charset="iso-8859-1";
reply-type=original
Good Morning Simon,
The hardware will be the Kenwood VC-H1, installe near the Svezda module
window.
http://www.kenwood.com/i/products/info/amateur/vch1.html
Can you ADD this mode Robot36 on Digital Master SSTV before the Soyuz launch
in 12 Oct?
Thank you!
73 Fabiano Moser CT/PY5RX
ARISS-PORTUGAL (Amateur Radio on the International Space Station)
Educational Coordinator
http://www.amrad.pt/
----- Original Message -----
From: "Simon (HB9DRV)" <simon(AT)hb9drv.ch>
To: "AMSAT.org" <amsat-bb(AT)amsat.org>
Sent: Saturday, October 04, 2008 9:48 AM
Subject: [amsat-bb] ISS SSTV Hardware
> Does anyone know what hardware will be used to send the SSTV / Robot 36
> images?
>
> Specifically does it send the VIS code at the beginning of the
> transmission?
>
> Simon Brown, HB9DRV
> www.ham-radio-deluxe.com
> _______________________________________________
> Sent via AMSAT-BB(AT)amsat.org. Opinions expressed are those of the author.
> Not an AMSAT-NA member? Join now to support the amateur satellite program!
> Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb
------------------------------
Message: 2
Date: Sat, 4 Oct 2008 11:27:58 +0200
From: "Simon \(HB9DRV\)" <simon(AT)hb9drv.ch>
Subject: [amsat-bb] Re: ISS SSTV Hardware
To: "Fabiano Moser - PY5RX" <fabianomoser(AT)gmail.com>
Cc: amsat-bb(AT)amsat.org
Message-ID: <FF0AAD6DE8F1441B8819FDC8E6224D15(AT)doubletrouble>
Content-Type: text/plain; format=flowed; charset="iso-8859-1";
reply-type=response
Hi,
Thanks for the info, Robot 36 support being tested already.
Some specs on this device: http://www.svs.net/wyman/products/vc-h1.htm
Still looking for VIS code info...
Simon Brown, HB9DRV
www.ham-radio-deluxe.com
----- Original Message -----
From: "Fabiano Moser - PY5RX" <fabianomoser(AT)gmail.com>
>
> Can you ADD this mode Robot36 on Digital Master SSTV before the Soyuz
> launch in 12 Oct?
>
------------------------------
Message: 3
Date: Sat, 4 Oct 2008 11:31:30 +0200
From: "Simon \(HB9DRV\)" <simon(AT)hb9drv.ch>
Subject: [amsat-bb] Re: ISS SSTV Hardware
To: <amsat-bb(AT)amsat.org>
Message-ID: <F01DE799BAF343A78E050DA04CA6E268(AT)doubletrouble>
Content-Type: text/plain; format=flowed; charset="iso-8859-1";
reply-type=original
In German: http://www.darc.de/distrikte/g/t-agaf/sstv7-99.html
Looks like the camera supports VIS codes which makes life much easier. Robot
36 is a 'tricky' mode to decode at times.
Simon Brown, HB9DRV
www.ham-radio-deluxe.com
----- Original Message -----
From: "Simon (HB9DRV)" <simon(AT)hb9drv.ch>
>
> Still looking for VIS code info...
>
------------------------------
Message: 4
Date: Sat, 4 Oct 2008 05:37:57 -0400
From: "Tim Tapio" <tim(AT)timtapio.com>
Subject: [amsat-bb] SSB SP-7000 rejection
To: <amsat-bb(AT)amsat.org>
Message-ID: <000001c92604$e2b2e7b0$a818b710$(AT)com>
Content-Type: text/plain; charset="us-ascii"
Hello all,
I'm planning a new antenna system and planning on using an SSB preamp on the
430 downlink side. The 7000 uses helical bandfiltering.
My antenna separation will be on an 8' fiberglas boom. Will desense be an
issues? Should I plan on using a bandpass filter such as a duplexer?
Thanks and 73 de Tim, K4SHF
------------------------------
Message: 5
Date: Sat, 04 Oct 2008 18:58:31 +0900
From: Mineo Wakita <ei7m-wkt(AT)asahi-net.or.jp>
Subject: [amsat-bb] AO-51 L/U APRS
To: amsat-bb(AT)amsat.org
Message-ID: <EC92607C20546ei7m-wkt(AT)asahi-net.or.jp>
Content-Type: text/plain; charset=us-ascii
Now, it is under operation normally AO-51 L/U APRS
using UISS_SatGate via PACB-1.
http://www.ne.jp/asahi/hamradio/je9pel/81003a51.jpg
http://www.ne.jp/asahi/hamradio/je9pel/81004uis.jpg
Thank you.
---------------------------------------------
Name: Mineo Wakita / JE9PEL, JAMSAT member
Mail: ei7m-wkt(AT)asahi-net.or.jp
URL : http://www.ne.jp/asahi/hamradio/je9pel/
QTH : Yokohama Japan, GL:pm95tj
Date: Oct 4, 2008
---------------------------------------------
------------------------------
Message: 6
Date: Sat, 4 Oct 2008 12:01:04 +0200
From: "Wouter Weggelaar" <wouterweg(AT)gmail.com>
Subject: [amsat-bb] Re: ISS SSTV Hardware
To: "Simon (HB9DRV)" <simon(AT)hb9drv.ch>
Cc: amsat-bb(AT)amsat.org
Message-ID:
<7abd0e260810040301u5b0a5c31uc83df9e951ffc82b(AT)mail.gmail.com>
Content-Type: text/plain; charset=ISO-8859-1
Hi Simon,
I've just been on the phone with a ham who has the VC-H1 and he just
took a picture and sent it with robot36. It sounds like there only is
a 2300Hz tone at the beginning.
I don't own one myself, but according to him there is no setting to
enable or disable VIS in a menu. Maybe the VC-H1 selects VIS-mode on
the "newer" modes like scotty and martin.
The german website seems to mention autoselection of the correct mode
on reception and uses this mode to determine the transmit mode for the
next picture. But then again, my german is not that good...
Good luck and keep up the good work on HRD!
Wouter Weggelaar
PA3WEG
On Sat, Oct 4, 2008 at 11:31 AM, Simon (HB9DRV) <simon(AT)hb9drv.ch> wrote:
> In German: http://www.darc.de/distrikte/g/t-agaf/sstv7-99.html
>
> Looks like the camera supports VIS codes which makes life much easier. Robot
> 36 is a 'tricky' mode to decode at times.
>
> Simon Brown, HB9DRV
> www.ham-radio-deluxe.com
>
> ----- Original Message -----
> From: "Simon (HB9DRV)" <simon(AT)hb9drv.ch>
>>
>> Still looking for VIS code info...
>>
> _______________________________________________
> Sent via AMSAT-BB(AT)amsat.org. Opinions expressed are those of the author.
> Not an AMSAT-NA member? Join now to support the amateur satellite program!
> Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb
>
------------------------------
Message: 7
Date: Sat, 4 Oct 2008 12:07:07 +0200
From: "Simon \(HB9DRV\)" <simon(AT)hb9drv.ch>
Subject: [amsat-bb] Re: ISS SSTV Hardware
To: "Wouter Weggelaar" <wouterweg(AT)gmail.com>
Cc: amsat-bb(AT)amsat.org
Message-ID: <73F843A3CD2E4605850A13A57C3C2429(AT)doubletrouble>
Content-Type: text/plain; format=flowed; charset="iso-8859-1";
reply-type=original
Hi,
I found the handbook online - I think VIS is always sent and used for
receive detection as well.
Simon Brown, HB9DRV
www.ham-radio-deluxe.com
----- Original Message -----
From: "Wouter Weggelaar" <wouterweg(AT)gmail.com>
> I don't own one myself, but according to him there is no setting to
> enable or disable VIS in a menu. Maybe the VC-H1 selects VIS-mode on
> the "newer" modes like scotty and martin.
------------------------------
_______________________________________________
Sent via amsat-bb(AT)amsat.org. Opinions expressed are those of the author.
Not an AMSAT member? Join now to support the amateur satellite program!
http://amsat.org/mailman/listinfo/amsat-bb
End of AMSAT-BB Digest, Vol 3, Issue 502
****************************************
Read previous mail | Read next mail
| |
