| |
G8MNY > TECH 08.05.22 14:55l 31 Lines 951 Bytes #999 (0) @ WW
BID : 1521_GB7CIP
Read: GUEST
Subj: 13m 2 Lambda Slot
Path: IZ3LSV<ED1ZAC<EA5URD
Sent: 220506/0720Z @:EA5URD.EAMU.ESP.EU #:46695 XFBB7.07 Bid:1521_GB7CIP
R:220506/0715Z @:EA2RCF.EAVI.ESP.EU #:29306 [Vitoria] $:1521_GB7CIP
R:220506/0715Z 28584@ED2ZAE.EAVI.ESP.EU LinBPQ6.0.14
R:220506/0715Z 589@F1OYP.FAQI.FRA.EU BPQ6.0.22
R:220506/0715Z 21178@N7HPX.#BOI.ID.USA.NOAM BPQ6.0.19
R:220506/0715Z 17876@VA7RBP.#SCBC.BC.CAN.NOAM LinBPQ6.0.22
R:220506/0715Z 13007@VE3UIL.#EON.ON.CAN.NA LinBPQ6.0.22
R:220506/0714Z 9984@VE3KPG.#ECON.ON.CAN.NOAM BPQ6.0.22
R:220506/0714Z @:GB7CIP.#32.GBR.EURO #:1521 [Caterham Surrey GBR] $:1521_GB7CIP
From: G8MNY@GB7CIP.#32.GBR.EURO
To : TECH@WW
For a 2 lambda slot, with both ends closed with conducting disks, with coaxial
feeder to midpoint.
for 2320 MHz
slot length 280 mm
slot width 3 mm
tube dia 19 mm by 18 swg (0.75in)
The impedance at the feed point is 200 ohms
You need to construct a suitable balun.
For more details refer to Microwave Handbook vol 1 , page 4.44 onwards.
73, Pete G6KUI
Why don't U send out an interesting bul?
73 De John, G8MNY @ GB7CIP
Read previous mail | Read next mail
| |
