| |
VK6BE > WINPAC 03.07.09 14:53l 33 Lines 1276 Bytes #999 (0) @ WW
BID : 600047VK6BE
Read: GUEST
Subj: Re: ini settings
Path: IZ3LSV<IK6ZDE<XE1FH<VK2DOT<VK6ZRT
Sent: 090703/1229Z @:VK6ZRT.#BUN.#WA.AUS.OC #:41181 [Boyanup] $:600047VK6BE
From: VK6BE@VK6ZRT.#BUN.#WA.AUS.OC
To : WINPAC@WW
Thanks Charlie.That's easy to answer.
The reason I did not send my ini and BBS settings was that they were NOT
my initial settings. I used settings from a ZL, and from at least three OZ
packeteers, tried them all.Quite obviously the problem was not with those
settings or those people sending them would have had the same problem as I
have. They didn't so settings could not be the problem..
I have also used prompts sent by various people. None made the slightest
difference.
The problem is not consistent. It has only happened since I went to
telnet and it has steadily got worse. If there are short bulletins
everything acts normally but as soon as a bulletin goes above about 12 kB
everything goes crazy. That bulletin loses all or some of its text which
tajkes the place of the text in the suceeding bulletins. Crazy. I don't
know why.
Have a good holiday. I am off to the north in two weeks so I won't be on
packet either.
Cheers,
Bob VK6BE.
>I've seen cut/pastes from other people saying that they are your settings
>but nothing direct from you. You did (at one point) tell us not to ask for your INI settings as the
"problem is not in there"... Quite why you dug your heels in over that I
do not know.
Read previous mail | Read next mail
| |
